Veritas Miniature Edge Trimming Plane Review By: I.Ball
Category: Miniature Tools
Manufacturer: Veritas
Tool Type: Miniature Edge Trimming Plane
Model No: N/A
This Veritas Miniature Edge Trimming Plane review looks at the plane
made by Veritas Tools of Canada.
The Veritas Miniature Edge Plane is a small scaled down version of the
Veritas Edge Plane with the miniature version being only 2 3/8" long,
weighing in at 1.6oz.
Ideal for delicate, detailed work such as model making and musical instrument
making, in particular useful for fine trimming work on thin pieces of
work up to 3/8" thick.
The Veritas Miniature Edge Plane is constructed from investment-cast
stainless steel fitted with a 1/2" (13mm) wide, 1.5mm thick, A2 steel
blade which is skewed at 30 degrees.
This blade has a 25 degree bevel which is set on a low-angle 12 degree bed which
gives a 37 degree cutting angle.
The positioning of the blade including the depth of cut is set by hand.
Supplied in a hard, black, embossed, fitted, leatherette case which is packaged
in a Veritas cardboard box.
Body:
investment cast stainless steel
Plane finish:
natural and black
Blade Bed:
12 degrees
Overall Cutting Angle:
37 degrees
Length:
60mm (2 3/8 inch)
Width:
13mm (1/2 inch)
Weight:
45g (1.6oz)
Veritas Miniature Block Plane Blade / Cutter
Cutter: A2 - hardened to Rockwell 60-62
Cutter Width: 13mm (1/2 inch)
Cutter Thickness: 1.5mm (1/16 inch)
Cutter Bevel: 25 degrees
Cutter Skewed Angle: 30 degrees
2011 - Today
Miniature Veritas Edge Trimming Plane
Veritas Mini Edge Trimming Plane
....
Do you have a question/answer or something to share about this tool?
Please Contact Us
- Veritas Tools Inc.
(i) Please always refer to and follow the manufacturer's instructions / guidelines /
safety notices / cautions and similar notices as the manufacturer's instructions
may contain important information on safety, personal safety and the good health of your tool,
something to which this review's scope does not guarantee to extend to.
(ii) This review may give warning(s) / advisory notes / cautions / guidelines given
in good faith however any such information should not be solely relied upon and should not be seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines.
Refer to disclaimer note (i) for information on safety, as well as the
good health of your tool.
In addition refer to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(iii) The details here are given in good faith, there is scope for error and shouldn't
be fully relied upon, please be aware the details may also become out of date due to manufacturer
changes to the product, please confirm any details for yourself by performing additional
research from reliable sources.
Enjoy viewing the encyclopedia of tools.
If you are inspired by our content or use info such as dates, sizes,
details from FindMyTool.co.uk
please kindly give credit where credit is due via giving a nod in a video
or a link to this website.
Please see our terms if using more than a few dates
or details.
"Just stumbled across your website and an absolute treasure trove of information.
I was recently given an old Stanley 110 block plane and wanted to know more about it.
Your website told me everything I needed to know.
But there is so much more to read. I forsee me spending a lot of time just reading
page after page. I can appreciate how much time this will have taken to put together.
I just wanted to let you know that your hard work is appreciated."