YouTube video tutorials showing how to setup an iron smoothing plane - the tutorial applies for any similar iron smoothing plane...
YouTube videos showing iron bench planes in use - the tutorial applies for any similar iron smoothing planes/bench planes...
At the beginning of the stroke the hand holding the front knob pushes down tightly in order to prevent 'dipping' at the rear end; this pressure is relieved as the stroke is being completed.
In this YouTube video by 'Mortise & Tenon Magazine', presenter Mike talks about and shows how to use a wooden smoothing plane.
In this YouTube video, Paul Sellers talks about the setting-up of the bench plane and sharpening the blade.
* Important: please refer to the 'disclaimer' at the foot of this review.
* Wearing safety clothing and eye protection is usually a good idea to help protect against injury.
- This tool has sharp parts, take suitable precautions when using/handling/storing
the tool to prevent injury.
- Failure to loosen parts when making adjustments can result in damage
to the tool. Never force a part to move.
- Overtightening parts can cause damage to the tool.
(i) This review/article may give warning(s) / advisory notes / cautions / guidelines given
in good faith, any such information should not be solely relied upon and seen
as the exhaustive list of warnings / advisory notes / cautions / guidelines. Refer
to good safety practices for the safety of you and others. Refer to good practices
for the good health of your tool and property.
(ii) The details here are given in good faith, the details are constantly growing
and evolving, there is scope for error and shouldn't be fully relied upon,
please confirm any details for yourself by performing additional research from
reliable sources.
Enjoy viewing the encyclopedia of tools.
If you are inspired by our content or use info such as dates, sizes,
details from FindMyTool.co.uk
please kindly give credit where credit is due via giving a nod in a video
or a link to this website.
Please see our terms if using more than a few dates
or details.
"Just stumbled across your website and an absolute treasure trove of information.
I was recently given an old Stanley 110 block plane and wanted to know more about it.
Your website told me everything I needed to know.
But there is so much more to read. I forsee me spending a lot of time just reading
page after page. I can appreciate how much time this will have taken to put together.
I just wanted to let you know that your hard work is appreciated."